• Portable and powerful hole puncher allowing the operator easy operation with no excessive pressure
  • Professional finish on job with no damage to finished painted products
  • Can be applied to any working position allowing the operator more flexibility to punch holes in confined situations for control panel work
  • Punching operation is simple, fast & easy requiring little effort


  • Punching Capacity: 15 - 120mm (round) 20 - 50mm (square)
  • (Special sizes available for rectangular size holes to meet your specifications subject to punching capacity)
  • Max. Thickness of Material: 3.2mm mild steel, 2.0mm stainless steel
  • Output capacity: 5 ½ ton
  • Weight: 3.5kg (body only)


Round Punch & Die Set Size

Applicable Piston Shaft

 Mild Steel

 Stainless Steel

12.7mm PXM 1/4 x 3/8  1.6mm  1.0mm
15mm to 16mm PXM 3/8 x 3/8  2.3mm  1.6mm
17mm to 30mm PXM 3/8 x 3/8  3.2mm  2.0mm
31mm to 50mm PXM 3/8 x 3/4  2.3mm  1.6mm
51mm to 78mm PXM 3/8 x 3/4  2.3mm  1.2mm
79mm to 120mm PXM 3/8 x 3/4  1.6mm







PX-2 is available in 3 Standard kits;

PX-2 KIT 1

Comprising of;

PX-2 Flexible Hose Hydraulic Hole Punch Body

6 round punch & die sets; 17.2, 20.2, 26 32.2, 39.1 & 51.8mm

2 piston shafts; PXM 3/8 x 3/8 & PXM 3/8 x 3/4

1 heavy duty steel carry case


PX-2 KIT 2

Comprising of;

PX-2 Flexible Hose Hydraulic Hole Punch Body

8 round punch & die sets; 17.2, 20.2, 26, 32.2, 39.1, 51.8, 64.5 & 76.2mm

2 piston shafts; PXM 3/8 x 3/8 & PXM 3/8 x 3/4

1 heavy duty steel carry case


PX-2 KIT 3

Comprising of;

PX-2 Flexible Hose Hydraulic Hole Punch Body

7 round punch & die sets; 16.3, 20.2, 22.5, 25, 32.2, 40 & 50mm

2 piston shafts; PXM 3/8 x 3/8 & PXM 3/8 x 3/4 

1 heavy duty steel carry case


PX-2 Hydraulic Punch Body

c/w carry case (special kit can be supplied to suit your specific punch & die set requirements)

We offer an extensive range of punch and dies. Cutting dies of all Kamekura manufactured products are made in Japan and are designed to the highest quality against wear and tear for long life under normal working conditions. Punch and dies provide strong resistance against wear, especially when working with stainless steel.  Round punch and die sets are fully machined from the highest quality tool steel (ISO) with 8 cutting sides and are hardened to 55 rockwell.  Square punch and die sets are manufactured from the highes
t quality tool steel (ISO) by EDM machine centre and are also hardened to 55 rockwell.


Comprehensive range of punch & die sets available from 15mm through to 120mm.


Standard square punch & die set sizes available from 20mm through to 50mm in 5mm graduation (ie 20 x 20, 25 x 25, 30 x 30 etc). Non standard square and rectangular punch and die sets can be ordered, lead time for special die sets is generally 4-5 weeks.




© Stainelec Hydraulic Equipment 2014.

  Site Map